Bullet traping box R6500
RUTEC R6500 Bullet traping box
The RUTEC R6500 bullet trap is designed for energies up to E0 ≤ 7,000 joules!
The basic body consists of a 4 mm ST 52 steel sheet. The RUTEC R6500 bullet trap is designed for energies up to E0 ≤ 7,000 joules. The basic body consists of a 4 mm ST 52 steel sheet. The top 250 mm of the Back wall are also re-enforced with 12 mm Hardox 500. Over large, centrally attached cut outs on the top and bottom the box can both be filled with granules and be drained downwards.
The two side guides that accommodate the front panels are made of a special plastic and are connected to the box with screws on the side. This enables easy exchange, if necessary.
The three front panels made of 30 mm highly wear-resistant polyurethane are stabilized among each other by a Tongue and Groove System and enable an easy exchange of individual
Optionally, the entire rear wall can also be fitted with a 12mm Hardox 500 steel can be retrofitted as an end plate. A Appropriate guidance is already prepared on the back. A movable underframe for the Bullet trap box included. So the system can various positions can be moved.
RUTEC R6500 mobile shootingboxR6500 Shootingbox from RUTEC©
The filling of the R6500 consists of RUTEC R5000 PUR granulate. This ensures that even high-energy projectiles are safe be picked up and stopped. Because of the special physical properties of the granules can take a long time Service life can also be achieved with concentrated shelling.
For detailed information download the datasheet or contact us here.